Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Bustleton?
Chimney cap and crown work in Bustleton typically runs $185 to $2,850 depending on whether you’re replacing a stock cap, rebuilding a cracked crown, or doing both at once. A standard stainless cap installed on a single flue usually lands around $185 to $450, while crown repair with a resurfacing product like HeatShield runs $650 to $1,400. Full crown rebuilds on older masonry chimneys push toward the top of the range. We give a written estimate before any work starts, and the estimate sets the final price.
Call (833) 350-7109. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Chimney Cap & Crown Cost Breakdown (2026)
Here’s how the line items break down for the Bustleton market this year. These are typical installed prices, not the number on a truck, and every job gets a written estimate before we start.
| Work | Typical Range | What’s Included |
|---|---|---|
| Single-flue stainless cap (Gelco, Famco) | $185 – $450 | Cap, hardware, fit to flue tile, install |
| Multi-flue cap (two or more flues) | $380 – $850 | Custom-fit top plate, screen, install |
| Custom-fabricated cap for odd flue sizes | $550 – $1,100 | Fabrication, delivery, install |
| Crown repair with HeatShield resurfacing | $650 – $1,400 | Crack fill, resurfaced crown, bonding agent |
| Partial crown rebuild | $850 – $1,800 | Chip out damaged section, pour new concrete crown |
| Full crown rebuild | $1,400 – $2,850 | Remove old crown, re-form with proper overhang and drip edge, cure |
| Cap plus crown repair bundle | $850 – $1,650 | Both done in one visit |
| Chimney sweep before cap install | $175 – $350 | Standard cleaning, inspection notes |
What pushes a job up? Odd flue counts, a crown that’s failed at the mortar joint rather than just the surface, and any sign the water has already gotten into the brick below. What brings it down? A small crack on an otherwise sound crown that can be resurfaced with HeatShield rather than poured from scratch. Knowing which one you’re looking at is half the estimate.
What Affects Chimney Cap & Crown Pricing in Bustleton
The price isn’t just the material. Here’s what actually moves the number on a Northeast Philadelphia chimney:
- Number of flues. A single-flue cap is quick and off the shelf. A two- or three-flue cap needs a custom top plate and screen assembly, and the labor runs closer to a full day.
- Crown condition. A hairline crack that gets resurfaced with HeatShield is a different job than a crown that’s pulled away from the flue tile. If the crown is flexing or a chimney sweep can already see daylight under it, we’re talking rebuild territory.
- Roof pitch and height. Two-story homes on steeper roofs in the Bustleton area mean more setup, more fall protection, and more time. That time is real and it shows in the estimate.
- Masonry condition below the crown. If the crown failed because water has been getting into the brick and spalling the face, the repair gets bigger. We look at the top courses before we quote, not after.
- Material choice for the crown. Standard portland-based mix is less expensive than a HeatShield resurfacing system, but both have their place depending on whether the crown is cracked on the surface or structurally failing.
- Brand and fit for the cap. Purpose-engineered caps from Gelco and Famco fit better and last longer than the generic hardware-store covers. The price gap between a stamped steel cover and a properly sized stainless cap is small compared to the cost of doing it twice.
In Philadelphia’s climate, crowns take a beating from the freeze-thaw cycle. Water gets into a hairline crack, freezes overnight, expands, and widens the crack. That cycle repeats every winter. A crown that looked fine in October can be failing by March. This is why we treat the cap and the crown as one water-management system, not two separate line items.
Why Cap and Crown Belong Together
A chimney cap keeps rain and animals out of the flue. A properly sloped crown keeps rain off the masonry below the flue tile. Fix one and skip the other, and water finds the other path. We handle the full system, not just the sweep. When we’re on the roof, we’re looking at both, plus the flashing and the top courses of brick, because that’s where the failures start.
Every cap we install is spec’d by name. Gelco and Famco caps are purpose-engineered for the flue size they sit on, not one-size-fits-all covers. Same idea on the crown side: when resurfacing is the right fix, we use HeatShield, a repair method that restores the crown surface without breaking out the whole pour. When it isn’t the right fix, we say so and quote the rebuild instead.
How to Save on Chimney Cap & Crown
Some of these save money outright, and some just keep you from paying twice.
- Bundle cap and crown in one visit. If both need work, the setup and roof time are paid for once. Typical savings run $150 to $300 compared to scheduling two separate trips.
- Resurface before you rebuild. If the crown is only cracked on the surface and the structure underneath is sound, HeatShield resurfacing costs less than half a full rebuild. Ask specifically whether resurfacing is an option, because the answer depends on what the crown looks like under the cap.
- Get the cap right the first time. A properly sized stainless cap from Gelco or Famco costs more up front than a generic cover. It also doesn’t warp or tear off in a Nor’easter, and it doesn’t have to be replaced in three years.
- Catch it early. A $185 cap install on a healthy crown is the cheapest version of this job. Every year the crown isn’t protected, the chance of a rebuild goes up.
- Ask for a written estimate up front. Ours are free. Call (833) 350-7109, and we’ll spell out exactly what we’re seeing and what each option costs.
When Should You Repair Versus Replace a Crown?
Resurface when the crack is shallow, the crown is still bonded to the flue tile, and the mortar joint underneath is solid. Rebuild when the crown has separated, is flexing, or the brick top courses are already saturated. A sweep or inspection in the fall catches the difference before the freeze kicks in. If you’re already getting chimney cap & crown work done, this is the decision that sets the price.
One thing we’d flag: a crown problem that’s been left alone for a few seasons is rarely just a crown problem. Water that beats a cracked crown finds the flue tile next. That’s when a repair turns into a chimney liner installation, and the estimate gets bigger. Catching it at the crown stage is the cheaper path every time.
What a Typical Cap and Crown Job Looks Like
We start on the roof. The cap comes off, and we photograph the crown and the top few courses of brick. From there it’s one of three paths: a straight cap replacement if the crown is sound, a crown resurfacing with HeatShield if the cracks are surface-level, or a rebuild if the crown is structurally failing. We clean up, set the new cap with proper clearance over the flue, and walk you through what we did and what to watch for.
The whole visit usually runs a half-day to a full day depending on which path we’re on. Weather matters. We won’t pour or apply a crown product in the rain, and freeze-thaw in the middle of a Philadelphia winter means we’re not doing crown work in January any more than the masons do. If it’s the wrong time of year for a crown pour, we’ll tell you and schedule the cap now and the crown for when the weather cooperates.
Chimney Cap and Crown Work on Bustleton’s Older Housing Stock
Many homes in Bustleton have chimneys that were built with the house and have had the crown patched once or twice already. That history matters. A crown that’s been smeared with mortar three times isn’t a repair candidate anymore. It’s a rebuild with a clean form and a proper drip edge, or it’s going to fail again. We see this a lot in Northeast Philadelphia because many of these chimneys are doing exactly what they were built to do: venting a fireplace and a heating system, with a cap that was added at some point and a crown that’s never been touched since.
The right fix is the one that matches the actual condition. If the chimney repair needed below the crown is significant (spalling brick, a failed flue tile, deteriorated mortar), that gets scoped into the same estimate. We’d rather quote the whole job than find out mid-repair that a chimney rebuild is actually the answer.
FAQs – Chimney Cap & Crown Cost
How much does a chimney cap cost in Bustleton?
A standard single-flue stainless cap installed runs $185 to $450 in Bustleton. Multi-flue caps go to $380 to $850, and custom-fabricated caps for odd flue sizes land between $550 and $1,100. Gelco and Famco caps fall within these ranges and are sized to your specific flue. Call (833) 350-7109 for a free estimate, and we’ll quote your exact flue count and size.
How much does chimney crown repair cost in Bustleton?
Crown repair with HeatShield resurfacing typically runs $650 to $1,400, while a full crown rebuild runs $1,400 to $2,850. The difference comes down to whether the crown is only cracked on the surface or has structurally failed. Partial rebuilds on a defined damaged section sit in between, at $850 to $1,800. Call (833) 350-7109 for a free estimate that tells you which one you’re looking at.
Is it cheaper to repair or replace a chimney crown?
Repair is cheaper when the crown is only surface-cracked and still bonded to the flue tile. A HeatShield resurfacing can run less than half a full rebuild. Replacement is the better value when the crown has separated or is flexing, because patching a failing crown just delays the inevitable and lets water into the brick in the meantime. The written estimate lays out both options and the reasoning. Call (833) 350-7109 for a free estimate.
Do I need a chimney cap if I already have a crown?
Yes. The crown protects the masonry below the flue; the cap protects the flue itself and everything it vents. Rain, birds, squirrels, and wind-blown debris all enter an uncapped flue, and the crown won’t stop any of it. A $185 to $450 cap install is the least expensive prevention on the entire chimney. Call (833) 350-7109 to get one sized correctly for your flue.
Can you install a chimney cap and repair the crown in the same visit?
In most cases, yes, and bundling the two typically saves $150 to $300 compared to two separate trips. Bundled cap-and-crown work runs $850 to $1,650 in Bustleton. The exception is when a crown rebuild needs a cure window that the weather won’t cooperate with, and in that case the cap goes on now and the crown is scheduled when conditions are right. Call (833) 350-7109 for a free estimate.
Can you come today?
Same-day service is often available for cap work and crown assessments. Call (833) 350-7109 and we’ll book you into the next opening. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday.
Work With a Full-Scope Chimney Specialist in Bustleton
Cap and crown work isn’t a big-bid job for most homeowners, but it is a job that rewards getting the diagnosis right. A cap on a failing crown is money spent twice. A rebuild on a crown that just needed resurfacing is money spent on the wrong thing. We handle cap and crown as part of the full chimney system, with chimney cleaning, chimney inspection, and fireplace repair under the same roof, so you’re not chasing down a second contractor when water damage turns out to be deeper than the crown.
Our technicians have up to 9 years of experience. We work with DuraFlex liners, HeatShield resurfacing, Gelco and Famco caps, and components from Olympia Chimney and Copperfield. Every job is scoped with a written estimate before any work begins.
Chimney waterproofing is worth asking about during a cap and crown visit, because it seals the brick the same way a cap seals the flue. And if you’re comparing pros in nearby towns, take a look at our Huntingdon Valley cap and crown pricing guide and Fox Chase chimney cap and crown costs to see how the ranges compare.
Call (833) 350-7109 for a free estimate on chimney cap and crown work in Bustleton. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
More Helpful Reading
- Chimney cap installation in Bustleton – what goes into a proper cap install
- Chimney crown repair in Bustleton – diagnosing cracks before they spread
- Chimney leak repair – when a leak isn’t coming from the crown
- Chimney masonry repair – brick and mortar work below the crown
- Chimney animal removal – what an uncapped flue lets in
Pricing reflects the Bustleton market as of 2026. Chimney Sweep Bustleton offers free estimates – call (833) 350-7109.
Written by the team at Chimney Sweep Bustleton.
What Our Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Travis Vaughn"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Nicole Bennett"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Holly Meyer