Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Somerton
Chimney repair in Somerton usually starts with something you can’t see from the living room: a flue that’s cracked, spalling, or never lined in the first place. We handle the full system, not just the sweep, so a repair here covers the flue, the mortar, the crown, and the flashing that keeps water out of your brick. If you’ve noticed crumbling joints on an exterior chimney or a damper that won’t seat right, call (833) 350-7109. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Somerton Homeowners Call Chimney Sweep Bustleton for Chimney Repair
Most of the chimneys we look at in Somerton date to when the neighborhood was built, and the work that’s needed reflects that. Our technicians have up to 9 years of experience, and they’ve spent a lot of that time on brick split-levels and ranches where the fireplace was original to the house.
What separates a repair from a guess is evidence. We put a camera down the flue and show you the picture before we recommend anything, so you’re not being told you need a reline you can’t verify. When work is genuinely needed, we specify the material by name: HeatShield for resurfacing a liner that’s still structurally sound, DuraFlex for a stainless reline sized to the appliance, Olympia Chimney for components, Gelco or Famco caps for the top.
Somerton is a short run for our team, and we take calls across the neighborhood. If your chimney sits on an outside wall, that changes how we diagnose it, and it’s the first thing we check when we arrive.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Somerton
Mortar Repointing
Philadelphia’s humid summers and hard freezes work on exterior mortar joints year after year. On the many exposed chimneys in Somerton, that cycle erodes the joints until bricks start sitting loose. Repointing replaces the failed mortar with new material matched to the existing brick, which stops the decay and keeps water from finding a path inside.

Spalling Brick Repair
Spalling is what happens when water gets into a brick, freezes, and pushes the face off. On Somerton’s brick and stone-veneer homes, we see it most on chimneys that face the weather with no cap or a cracked crown letting moisture in. We replace the damaged brick and correct the source of the water, because patching the face without fixing the cause just buys you a season or two.

Chimney Waterproofing
A breathable waterproofing treatment on the exterior masonry keeps bulk water out while letting the brick dry. That matters in Somerton, where the wet-to-freeze pattern of a Philadelphia winter is what does the damage. We waterproof after any mortar and brick work is finished, not before, so we’re not sealing in a repair that hasn’t cured.

Flashing Repair
Flashing is where the chimney meets the roof, and it’s the spot most water problems start. Loose or failed flashing lets rain run down the chimney’s side, into the attic, and into the brick itself. We reset or replace flashing so the joint sheds water the way it’s supposed to, and we check it on every repair visit.
Why So Many Somerton Chimneys Have No Liner at All
Here’s the local fact that shapes most of our repair work. Many Somerton chimneys on 1950s-60s split-levels were built with no flue liner at all, just bare brick. A sweep that starts routine can turn into a reline once the camera goes down, because there’s nothing between the flue gases and the masonry. That’s not a scam or an upsell. It’s just what’s inside the walls of these houses.
In a typical Somerton split-level, a homeowner books a routine sweep, and the technician’s camera shows original clay flue tile that has spalled and cracked, with mortar joints eroded by decades of freeze-thaw cycles on the exterior chimney. The usual fix is a stainless steel liner sized to the appliance, often paired with mortar repointing and a new crown to keep water out. Many of these homes also vent a furnace or water heater into flues that were never designed for them, so the repair often includes correcting the flue size and adding a proper cap. Nothing gets recommended without camera evidence you can see for yourself.
Trusted Brands We Service in Somerton
We install and work with professional-grade materials, not generic substitutes. That means DuraFlex flexible liner systems, HeatShield resurfacing for a liner that can be restored rather than replaced, Olympia Chimney and Copperfield components, and Gelco and Famco caps purpose-engineered for the job. These are the names we specify because they’re built for long-term performance. When a chimney in Somerton needs a part, we source the right product for that system and get it moving.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Somerton Homes
- Original clay flue tiles that crack after freeze-thaw winters. Once a tile cracks, creosote can seep into the brickwork behind it and raise the fire risk. A brush can’t reach that.
- Eroded mortar joints on exterior chimneys. Somerton’s humid summers and hard freezes loosen bricks and open paths for water around the flashing.
- Appliances vented into undersized or unlined stacks. A furnace or water heater in a flue never designed for it drafts poorly and builds third-degree creosote fast, the glazed kind a brush can’t remove.
- Cracked crowns and loose flashing. Water gets in through the top or the roof joint, then freezes inside the masonry and splits it from within.
Pricing for Chimney Repair in Somerton, PA
Repair pricing is set per job by a free written estimate, and you’ll know the number before any work starts. Typical ranges in the Somerton market:
| Service | Typical estimated range |
|---|---|
| Mortar repointing (partial chimney) | $450 – $1,200 |
| Spalling brick replacement | $600 – $1,800 |
| Chimney waterproofing | $300 – $600 |
| Flashing repair | $350 – $900 |
| HeatShield resurfacing | $1,200 – $2,500 |
| Stainless reline (DuraFlex) | $2,500 – $5,000 |
What moves the number is chimney height, how much masonry needs replacement, and whether a reline turns out to be involved. We don’t quote one of those and deliver another. Call (833) 350-7109 for an exact quote. Estimates are free.
We Also Serve Cities Near Somerton
Our work runs across Northeast Philadelphia, including Bustleton, Lower Moreland, Northeast Philadelphia, and Torresdale. If you’re just outside Somerton, we cover your chimney too. You can see the full scope of what we do on our chimney repair page, and read more about the area on our Somerton page.
Serving Somerton, PA – Our Local Coverage Area
We serve Somerton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Somerton
Often, yes, but not automatically. Many 1950s-60s split-levels here were built with bare brick and no flue liner, which means the flue gases touch the masonry directly. Whether that requires a reline depends on the condition of the brick and how the appliance is venting, and we won’t tell you it’s needed until you’ve seen the camera footage yourself. Call (833) 350-7109 to book a sweep with a camera inspection.
Look for crumbling, sandy mortar, loose bricks, or white staining on the outside of the chimney. Somerton’s exterior chimneys take the full freeze-thaw cycle, so the joints erode from the outside in. If you can pick mortar out with a fingernail, it’s failing and worth a look from a technician.
First-degree creosote is light soot a brush removes easily; third-degree is the glazed, hardened kind that bonds to the flue and a brush can’t touch. It matters in Somerton because appliances vented into undersized or unlined stacks build it fast. Third-degree buildup is a fire hazard and usually calls for resurfacing or a reline.
Yes. We put a camera down the flue and show you the footage before recommending anything. The worst part of this trade is being sold a liner you can’t verify, so we make sure you can see the problem yourself first. Call (833) 350-7109 for an inspection with a photo report included.
Sometimes it can wait, but water damage gets worse through a winter, not better, so a cracked crown and loose flashing are worth addressing before the first hard freeze. We’ll tell you plainly if it can safely wait and what to watch for. Call (833) 350-7109 for a free estimate.
Written by the team at Chimney Sweep Bustleton.