Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Glenside
If you live in Glenside and your chimney crown is cracked or your cap is missing, the water is already finding a way in. We handle the full system here, and cap and crown work on this town’s older homes means reading more than one flue in the same brick stack. Glenside’s early-20th-century twins and colonials are exactly the kind of houses that need it. Our technicians have up to 9 years of experience, and we work through our chimney cap & crown team to connect you with a vetted local pro who inspects, shows you the camera footage, and quotes the job in writing before anything is booked.
Call (833) 350-7109 for a free estimate.
Why Glenside Homeowners Call Chimney Sweep Bustleton for Chimney Cap & Crown
We’re set up to serve Glenside, and that matters most on the repair side. A sweep-only crew brushes the flue and stops. We connect you with a licensed pro who diagnoses the whole system: the crown, the cap, the flashing, the flue tiles, and whether the liner behind them is clay tile or bare coal-era brick. Homeowners in this part of Montgomery County ask hard questions, and they should. Vague assurances don’t hold up against a camera.
We get Glenside calls because the work here has a pattern. The 1890s – 1920s housing stock along the 19038 corridor has brick exterior chimneys and clay-tile flues, many originally built for coal and later retrofitted for oil, gas, or wood. That history leaves stacks with offset flues and unlined passages that a ground-level look can’t catch. The pro we connect you with documents what they find and shows you the footage before recommending anything. Nothing gets sold on guesswork. On the twin homes, cleaning one side can knock soot into the neighboring unit’s fireplace, so a pro checks for a shared or disconnected flue before sweeping.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Glenside
Custom Cap Installation in Glenside
Not every stack takes a stock cap. Glenside’s shared twin chimney breasts often carry two separate flues in one masonry mass, and the footprint rarely matches a box-store cover. A custom cap is built to fit the actual crown and cover every flue serving the unit. We work with Gelco and Famco caps, purpose-engineered products made for the job, not generic covers.

Cap Replacement in Glenside
When a cap rusts through or a wind storm peels it off, rain and animals get into a flue that may serve only one unit. On a twin stack that gap matters more, because a missing cap over one flue can let water run down into a neighboring passage. The pro measures, removes the old cap, and resets a properly sized replacement over every flue in the stack.

Crown Repair in Glenside
The exposed brick crown is usually the weakest point on these older Glenside chimneys. Philadelphia-area freeze-thaw cycles crack the mortar wash, water gets behind it, and the brick just below begins to spall. Reconstruction resets a proper overhang and a sound mortar surface so water sheds away from the flue rather than into it. This is the repair most likely to get skipped by a sweep-only crew.

Crown Coating in Glenside
Not every cracked crown needs a full rebuild. A crown that’s sound but failing at the surface can often be restored with HeatShield resurfacing, a repair method that renews the crown and flue surface without tearing out masonry. The question is which one you need, and that’s answered by what the camera shows, not by a guess from the ground. We explain when work can safely wait.
Trusted Brands We Service in Glenside
Installed with professional-grade products, specified by name. We connect Glenside homeowners with pros who use Gelco and Famco chimney caps and HeatShield resurfacing for crown and flue restoration. For liner work tied to a crown repair, DuraFlex flexible liner systems are on the list; components come through Olympia Chimney and Copperfield supply networks. These are the brands the trade trusts for long-term performance. We don’t claim partnerships, and we don’t carry parts in a truck. The pro sources what the job calls for, and you get a written estimate before any of it is ordered.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Glenside Homes
- Mortar crowns cracked by freeze-thaw. A cold, damp winter with repeated thaw is hard on an exposed brick crown. Once the mortar wash opens, water gets into the brick and the clay-tile flue below, and the spalling starts from the inside.
- Missing or undersized caps on the shared twin breast. On Glenside’s twins, one cap over a flue serving a single unit is easy to lose and easy to under-size. Rain and animals find the gap first.
- Spalled flue tiles and unlined coal-era brick. A crown can look sound from the ground while the flue tiles behind it are spalling. Coal-era conversions were often never lined at all, and only a camera reveals it.
- Two flues, two different conditions. A single stack can hold a clay-tile flue on one side and an unlined brick passage on the other. Cap and crown work has to account for both, not just the flue in use.
Pricing for Chimney Cap & Crown in Glenside, PA
Most of the hesitation we hear in Glenside is about being told a crown needs thousands in masonry work with no way to verify it. So here are typical ranges for this market. A typical custom or multi-flue cap installation in Glenside runs $350 – $850, depending on the number of flues and the footprint. Cap replacement generally runs $250 – $600. Crown repair and rebuild typically runs $650 – $1,800, and crown coating with resurfacing often lands between $450 – $900. Brick and flue tile condition, access, and whether the stack is a shared twin breast all move the number. The written estimate sets the final price, and the estimate is free. Call (833) 350-7109 to book one.
We Also Serve Cities Near Glenside
The same cap and crown work reaches the towns around Glenside. We connect homeowners in Roslyn, Jenkintown, Rockledge, and Elkins Park with vetted local pros who handle the full system, not just the sweep. If you’re just outside Glenside, call and we’ll confirm coverage.
Serving Glenside, PA – Our Local Coverage Area
We serve Glenside and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Glenside
Yes, each flue in the stack should have its own cap, even when the shared breast carries two passages. On Glenside’s twin homes one flue often serves only one unit, so a single cap over the wrong passage leaves the other open to rain and animals. The pro sizes the cap to the actual flue count and footprint. Call (833) 350-7109 for an exact quote – estimates are free.
It comes down to what the camera shows: a crown that’s sound but failing at the surface can often take a coating, while one that’s cracked through and letting water into the brick needs a rebuild. That’s the call we won’t make from the ground. The pro shows you the footage of the crown, flashing, and flue tiles before recommending either. Call (833) 350-7109 to book the inspection.
Because many of these stacks have an unlined brick passage from the original coal-fired build, and an open flue lets water soak straight into bare masonry. A cap keeps rain and animals out of a flue that may never have had a liner. Where a liner is later added, the cap keeps it protected. Call (833) 350-7109 for a free estimate.
Ask for a camera inspection of the crown, cap, flashing, and flue tiles, not just a sweep. The crown and the flues behind it are exactly what a flue-brush visit doesn’t reveal, and on a twin breast you want both passages checked. The pro documents what they find and shares the footage. Call (833) 350-7109 to book it.
A failing crown can let water in and degrade the flue, but smoking is often a draft or flue-sizing issue, so the crown isn’t the only suspect. The right move is a camera inspection that checks the whole stack before anyone blames one part. Sometimes the fix is simple, and we’ll tell you when work can safely wait. Call (833) 350-7109 for a free estimate.
If your Glenside chimney is overdue for a look, call (833) 350-7109 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The local pro documents the crown, cap, flashing, and flue tiles with a camera and shows you what they find before any work is recommended.
Written by the team at Chimney Sweep Bustleton.