Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Fireplace Repair Across Northeast Philadelphia
If your fireplace is smoking into the room, your damper won’t close, or your gas logs won’t light, we can help. Chimney Sweep Bustleton handles fireplace repair across Northeast Philadelphia, from the rowhouses off Frankford Avenue to the twins up in Somerton. This is older masonry territory, and most of what we find in these homes goes deeper than a dirty flue: undersized clay-tile stacks, spalled firebox mortar, crowns that have been cracking for years. We fix the actual cause, and we show you the camera evidence before we quote anything. Call (833) 350-7109. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Northeast Philadelphia Homeowners Call Chimney Sweep Bustleton for Fireplace Repair
We work this part of the city often enough to know the housing stock by heart. The post-war twins and rowhouses that make up most of Northeast Philadelphia were built with one shared masonry chimney wall between units, and those stacks have been through a lot: coal, then oil, then gas. Most of them still have original clay-tile flues that were never sized for what’s venting into them now. A repair that ignores that history is a repair you’ll be paying for twice.
Our technicians carry up to 9 years of experience, and we handle the whole system under one company: sweep, cap, crown, liner, rebuild, and fireplace repair. You don’t need a second contractor for the liner work once we’ve opened the firebox up. We also work with professional-grade materials specified by name. HeatShield resurfacing for restoring a damaged flue without full replacement. DuraFlex flexible liner systems where a liner is the right answer. Gelco and Famco caps for the top end, Copperfield components where the job calls for them. If a repair can safely wait, we’ll tell you that too. It’s your chimney, and you should be able to see what’s wrong with it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Fireplace Repair Services in Northeast Philadelphia
These are the repairs we’re called out for most in Northeast Philadelphia. Each one starts with an inspection so we can see the problem before we quote a fix.
Gas Fireplace Repair
Gas fireplaces are common in the converted rowhouse stock across Northeast Philadelphia, where an old coal or oil flue was later put into service for gas logs or a gas insert. When the pilot won’t stay lit or the logs won’t ignite, the cause is often the thermocouple, thermopile, or a draft problem pulling the flame out. We diagnose the appliance and the flue together, because a gas unit vented into an undersized stack will keep failing no matter how many parts get swapped.
Wood Burning Fireplace Repair
A wood fireplace that smokes into the room is the call we get most in the twins and rowhouses here. Open a damper, light a fire, and the smoke rolls out instead of up. It’s usually not the damper. It’s a flue that was sized for coal and can’t move the volume a modern fire produces, or firebox mortar that has spalled and lets smoke bypass the damper entirely. We camera the flue and show you what we find.
Fireplace Insert Service
An insert is often the right answer for a 1950s Northeast Philadelphia fireplace that drafts poorly, but only if it’s vented correctly. We install and service inserts with a liner sized to the appliance, so you get real heat instead of smoke in the living room. If the chimney crown and flashing aren’t sound, we address that first so water doesn’t undermine the new work.
Damper Repair
Dampers rust, warp, and seize, especially in fireplaces that sat unused through a few humid summers. In Parkwood and Somerton rowhouses, a damper that no longer seals lets conditioned air escape up the flue year-round and lets cold air back down in winter. We repair or replace dampers so they actually close, and we check the smoke chamber while we’re in there.
Trusted Brands We Service in Northeast Philadelphia
We install and work with DuraFlex flexible liner systems, HeatShield resurfacing, and Gelco and Famco caps, and we source components through Olympia Chimney and Copperfield. These are professional-grade products built for long-term performance, not generic big-box substitutes, and we specify them by name so you know exactly what’s going into your chimney. We don’t stock parts on a truck; materials are ordered to the job. When a repair needs a specific liner or cap, you’ll know the brand and the reason before we book it.
See the difference
Before
After
Before
After
Before
AfterCommon Fireplace Repair Problems We See in Northeast Philadelphia Homes
Here’s what the post-war housing stock in Northeast Philadelphia tends to produce, and why it looks different from what a detached suburban chimney needs.
- Undersized clay-tile flues. Original flues built for coal in 1950s twins are too small for modern wood or gas appliances, so draft fails and smoke spills into the room. It gets misread as a damper problem more often than not.
- Cracked crowns from freeze-thaw. Cold, damp Delaware Valley winters open cracks in the exposed brick crown and flashing seams, and water migrates down the party wall to spall the firebox mortar on both sides of a shared wall.
- Moisture in idle flues. Humid summers degrade mortar joints and the smoke chamber in fireplaces that sat unused for years. That damage needs camera evidence before anyone quotes a repair.
- Creosote buildup in converted stacks. A flue that once carried oil isn’t always clean when it’s switched to wood, and older deposits can mean a repair question rather than a simple sweep. We look first, then tell you what stage of creosote we’re dealing with.
Pricing for Fireplace Repair in Northeast Philadelphia, PA
We give ranges because that’s what’s honest. A typical damper repair in Northeast Philadelphia runs $150 to $350. Firebox mortar repair, repointing, and smoke chamber work typically runs $400 to $1,200, depending on how far the spalling extends. Pilot light and gas appliance diagnostics run $125 to $250, and a HeatShield flue resurfacing typically runs $1,000 to $2,200. Full stainless liner installation runs higher, and we quote that only after camera inspection. Freeze-thaw damage and party-wall water intrusion are what push a job toward the top of a range here. Every estimate is written per job, and the written estimate sets the final price. Nothing is recommended without camera footage you can see for yourself.
We Also Serve Cities Near Northeast Philadelphia
We cover Northeast Philadelphia and the surrounding communities, including Bustleton, Rhawnhurst, Torresdale, and Somerton. If you’re just outside the neighborhoods above, call and we’ll confirm coverage. The same camera-first approach applies across the area.
Serving Northeast Philadelphia, PA – Our Local Coverage Area
We serve Northeast Philadelphia and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fireplace Repair in Northeast Philadelphia
Yes, often both sides need attention, and it’s the single most common pattern we see in the brick twins and rowhouses off Bustleton and Frankford Avenues. A crown that fails on one side of a shared party wall almost always means the neighbor’s flue is deteriorating at the same rate. That makes crown repair a two-household conversation here in a way it never is in detached Bucks County suburbs. Call (833) 350-7109 for a free estimate on both units.
Because the original clay-tile flue was sized for coal and is now undersized for a modern wood fire, or the firebox mortar has spalled and lets smoke bypass the damper. Either way, the damper isn’t the cause. A qualified local pro runs a camera inspection, shows you the spalling or offset tile on screen, and typically recommends a HeatShield or stainless flue liner sized to the appliance, not a new fireplace. Call (833) 350-7109 for a free estimate.
Usually yes, but it needs a properly sized liner, not just an insert dropped into an unlined stack. Many unlined brick chimneys here were never sized for a modern appliance, so venting the insert correctly is the whole job. We confirm the crown and flashing are sound first. Call (833) 350-7109 and we’ll look at it.
First-degree creosote is a light, flaky soot that a normal sweep removes. Third-degree is glazed, hardened, and bonded to the flue, and it usually means a liner or resurfacing decision rather than a cleaning. The difference matters because it changes what the repair is. We camera the flue and show you which stage you’re dealing with. Call (833) 350-7109 for a free estimate.
Often yes, if the leak is coming from the crown or flashing, which is the usual path in a factory-built rowhouse chimney. If water is finding its way down the party wall, the flashing seam is the first place to check. We inspect both before recommending anything, and we’ll tell you plainly if the leak can safely wait. Call (833) 350-7109 for a free estimate.
If your fireplace isn’t drafting right, your damper won’t seal, or you’ve got water showing up where it shouldn’t, that’s the moment to have it looked at. We handle the full system, from the firebox up to the cap, and nothing gets quoted until you’ve seen the camera evidence. Call our fireplace repair team at (833) 350-7109. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Bustleton.