Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Village Shires
If you live in Village Shires, your chimney is probably older than it looks. Most of this development went up in the 1950s and 60s, and the caps and crowns on those houses are showing it. We handle the full system here, not just the sweep, so a loose cap or a cracked crown gets diagnosed and fixed in one visit rather than handed off to a second contractor. Our technicians have up to 9 years of experience, and we know why the split-levels on these streets fail the way they do.
Call (833) 350-7109 to book a cap or crown estimate in Village Shires. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Village Shires Homeowners Call Chimney Sweep Bustleton for Chimney Cap & Crown
We work across Village Shires often enough to recognize the pattern before we’re out of the car. The original brick-and-frame split-levels here carry exterior masonry chimneys, and those narrow 8×8 and 8×13 clay flue tiles were set with mortar joints that open after six decades of Bucks County freeze-thaw. That’s why a cap-and-crown call in Village Shires routinely turns into a reline conversation instead of a quick cap swap. We tell you that up front so nothing feels like an upsell halfway through the job.
Our reputation locally rests on showing the evidence first: a Level 2 inspection with photos, and a written estimate that sets the price per job. Nothing gets recommended until you can see what we’re seeing. If a crown can wait a season, we say so.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Village Shires
Cap and crown work is a dedicated service here, not a line item tacked onto a sweep. Water intrusion is the failure most inspections miss, and it starts at the top of the chimney.
Custom Cap
Factory-built fireplaces and the original masonry chases in Village Shires don’t share one standard dimension, so a universal cap leaves gaps at the corners. We measure the chase and have a custom cap made to fit, often from Gelco or Olympia Chimney, so rain, squirrels and downdraft stay out. On a tight lot where chimneys sit close to the neighbor’s roofline, that fit matters.

Multi-Flue Cap
Many Village Shires split-levels have more than one flue serving the fireplace and a furnace or water heater. A multi-flue cap covers all of them under a single correctly sized unit rather than stacking mismatched covers. We size it to the actual flue count and the chase opening, not to whatever fits at the supply house.

Crown Repair
The poured crown on an exterior split-level chimney takes the full brunt of southeastern Pennsylvania’s freeze-thaw cycle. After decades of that, the mortar spalls and cracks, and water travels down the chase. We rebuild the crown with the correct slope so it sheds water away from the chimney instead of into it.

Crown Coating
When the crown is cracked but still structurally sound, a coating can restore its surface and buy years before a rebuild is needed. We use HeatShield resurfacing, a repair method that restores integrity without full replacement, and we tell you plainly when coating is the right call and when it’s just delaying the inevitable. That honesty is what keeps homeowners calling back.
Trusted Brands We Service in Village Shires
We specify materials by name because generic substitutes fail faster on these chimneys. Our liners come from DuraFlex flexible systems, a professional-grade product built for long-term performance. Caps come from Gelco and Famco, purpose-engineered units rather than big-box covers, and we source components through Olympia Chimney and Copperfield. When a Village Shires chimney needs a part matched to its original setup, we work from the manufacturer’s specification rather than guessing. From annual cleaning to full liner replacement, one call covers it.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Village Shires Homes
- Cracked 1960s clay flue tiles. The original 8×8 and 8×13 tiles crack at their mortar joints, and a failing cap lets water in that speeds the breakdown. What starts as a cap call often becomes a reline decision.
- Spalling poured crowns. The exterior chimneys on the split-levels have taken sixty-plus Bucks County winters, and the crowns spall and crack, letting moisture travel down the chase into the attic and framing.
- Mismatched caps on factory-built fireplaces. A universal cap that doesn’t match the manufacturer’s chase dimensions leaves gaps that admit animals, rain and downdraft, so the fireplace smokes and the flue stays wet.
- Rusted or lifted caps. Caps rust through at the mesh or lift loose from their seating after enough freeze-thaw cycles, and once that happens the flue is open to the weather year-round.
On a typical Village Shires split-level, the factory-built fireplace or original masonry chase has a cap that has rusted through at the mesh or lifted loose from its seating, letting rain and nesting animals into the flue while the poured crown above spalls and cracks from years of freeze-thaw. A qualified local pro runs a Level 2 inspection, checks the flue liner joints and smoke chamber for cracking and creosote glaze, then usually re-seats or replaces the cap with a correctly sized multi-flue or custom unit and rebuilds or coats the crown to shed water away from the chase.
Pricing for Chimney Cap & Crown in Village Shires, PA
Here’s what cap and crown work typically runs in this market. A standard cap installation in Village Shires runs $250 to $650. A custom or multi-flue cap runs $400 to $900 depending on the chase dimensions and flue count. Crown repair runs $500 to $1,200, and crown coating runs $400 to $800. A reline, if the inspection calls for one, is quoted separately because it’s a different scope of work.
Those ranges move with the size of the chase, the condition of the crown, and whether the flue needs any repair underneath. The written estimate sets the final price, and the estimate itself is free. We’d rather show you the photo and let you decide than quote blind over the phone.
We Also Serve Cities Near Village Shires
Cap and crown work around this part of Lower Bucks County extends into the neighboring towns we cover: Penndel, Warminster, Hatboro and Lower Moreland. If your chimney sits just over the line, we’ll still take the call. Our chimney cap & crown service covers the same inspection-first approach in every one of them.
Serving Village Shires, PA – Our Local Coverage Area
We serve Village Shires and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Village Shires
Yes. A barely-used 1965 chimney is exactly the one that needs a look, because a cap that’s been letting water in for decades can crack the flue tiles and crown without any fire ever being lit. Occasional shoulder-season burning also builds creosote glaze that a sweep should clear. Call (833) 350-7109 to book an inspection – estimates are free.
A cap comes loose on a split-level when its mounting doesn’t match the chase dimensions, so it rocks in wind and lifts free. The exterior chimney on a split-level catches more weather than an interior one, and freeze-thaw works the fasteners loose over time. A correctly sized custom or multi-flue cap stops the repeat problem. Call (833) 350-7109 for a fit assessment.
Spalling means the crown’s surface is breaking off in flakes and chunks, usually from freeze-thaw moisture getting into the concrete and expanding. Left alone, it cracks through and lets water travel down the chase into the framing. Coating can restore a sound crown; a badly spalled one needs a rebuild. Call (833) 350-7109 and we’ll tell you which you have.
Usually no. A generic cap on a factory-built fireplace often doesn’t match the manufacturer’s chase dimensions, leaving gaps that admit animals, rain and downdraft. The right move is a custom cap sized to the actual chase, often from Gelco or Olympia Chimney. Call (833) 350-7109 to measure and quote it.
You know from the inspection, not from the price tag. A crown repair is a top-of-chimney fix, while a reline is needed when the flue tiles themselves are cracked or the mortar joints have opened, which is common in 1960s Village Shires chimneys. We show you the camera evidence so you can see the difference yourself. Call (833) 350-7109 for a free estimate.
Ready to stop guessing about the top of your chimney? Call (833) 350-7109 for a free estimate on chimney cap and crown work in Village Shires. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Bustleton.