Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Bustleton
If you live in Bustleton and your chimney crown is cracking or your cap has gone missing, the fix is usually straightforward once someone documents what’s actually happening up there. A chimney cap and crown aren’t decoration. They’re the two parts of the system that keep rain, animals, and freeze-thaw water out of brickwork that’s already carrying enough load. We connect Bustleton homeowners with independent local chimney professionals who inspect, photograph, and quote before anything gets rebuilt. Call (833) 350-7109 for a free estimate on cap and crown work. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Bustleton Homeowners Call Chimney Sweep Bustleton for Chimney Cap & Crown
Bustleton’s chimney stock is unusually consistent. The neighborhood is made up overwhelmingly of post-World War II brick rowhouses and twins built from the late 1940s through the 1960s, most with a single masonry fireplace and an exterior brick chimney. Those chimneys are now 60-75 years old. They’re the ones with spalled brick, weathered mortar crowns, and original clay flue tiles that have cracked. When you call about a cap or a crown here, the conversation almost always moves to the rest of the stack, because the rest of the stack has been out in the weather for three generations.
We’re set up for the whole system rather than just the brush. Liner work with DuraFlex flexible chimney liner systems, HeatShield resurfacing for liners that need restoration instead of replacement, and caps from Gelco and Olympia Chimney all come from the same visit. The local professionals we connect you with are licensed and insured as their state requires, and nothing gets recommended without camera footage you can look at yourself. We’re not interested in selling a liner because the flue looks dark on a phone camera.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
How Bustleton’s Post-War Chimneys Change the Cap and Crown Conversation
Here’s the local detail that matters most on this page. The exterior brick chimneys on Fairfield Street and along the Red Lion Road corridor were built and flued for one thing: the fireplace. In many of these houses, the same clay-tile flue now also vents a gas furnace or a water heater that was added decades later. So you have multiple appliances sharing a stack that was never designed for them. The flue is often undersized for the combined load and unlined in any modern sense. A cap or crown job on that chimney can’t just be measured to the footprint and screwed down. The professional has to know what’s venting into the stack before deciding how many flue openings a multi-flue cap covers and whether a liner assessment is part of the same visit.
That’s exactly where the worst upselling in this trade happens, and it’s why we’re direct about the order of operations. Camera inspection first. Level 2 inspection when the appliance mix calls for it. Photos and video before any quote. If the crown can be resealed and the tiles are sound, that’s the answer, and we’ll tell you so.
Our Chimney Cap & Crown Services in Bustleton
Cap Installation in Bustleton
A properly sized cap keeps rain out of the flue and stops chimney swifts and squirrels from turning the stack into a nesting box. On a Bustleton twin, the stainless mesh and lid have to be matched to the actual flue opening, not the outside of the brick. We connect you with local pros who install purpose-built Gelco and Olympia Chimney caps, plus custom stainless runs for stacks with irregular geometry. If squirrels are already inside, the animal comes out before the cap goes on. The local professional is licensed and insured as their state requires.

Cap Replacement in Bustleton
Most caps that fail here are the cheap galvanized single-flue covers that were already rusting when they went on. After twenty or thirty winters of freeze-thaw cycling, the mesh is gone and the lid is loose. Replacement on a rowhouse chimney usually means pulling the old cap, checking the flue tile for cracks that the missing cap exposed, and setting a new stainless cap sized to the crowns’ actual opening. That crack check is worth doing before anyone climbs down.

Crown Repair in Bustleton
The mortar crown is the sloped top of the chimney, and it’s supposed to shed water away from the brick. When it cracks, water goes down into the masonry instead, which is the beginning of spalling and mortar deterioration. Repair in Bustleton usually means removing the failed crown material, rebuilding the slope with a proper overhang beyond the brick face, and sealing the joint at the flue tiles. This is one of the work items these 60- to 75-year-old chimneys need most often.

Crown Coating in Bustleton
A coating makes sense when the crown is structurally sound but has hairline surface cracks that let water in. HeatShield chimney resurfacing is applied as a flexible repair material sized for movement, which matters in a climate where the top of a chimney goes through repeated freeze-thaw cycles every winter. Cracked crowns that get a coating instead of a rebuild are the ones we’d rather show you in photos first. If the crown is crumbling through its full depth, coating won’t hold and the honest answer is a rebuild.
Multi-Flue Cap and Custom Cap Work
Twins and larger rowhouse stacks often have two or three flue openings under one cap. A multi-flue cap has to clear each tile opening independently, so the lid is sized to the full chimney footprint with a solid stainless frame. Custom caps handle chimneys where the crown is out of square or where one flue serves a furnace and the other serves the fireplace. Measure twice here, because a loose cap rattles in a Nor’easter and a tight one cracks the crown it sits on.
Trusted Brands We Service in Bustleton
The materials we specify are named for a reason. DuraFlex flexible chimney liner systems for relining, HeatShield for liner restoration and crown resurfacing, Gelco and Olympia Chimney for caps, and Famco and Copperfield components where they fit the job. These are professional-grade products, not generic big-box substitutes, and they’re specified by name in the written estimate so you know what’s going onto your house. Turnaround on standard cap and crown work is quick because the parts are sourced from established wholesale chimney supply networks rather than improvised on the roof. Nothing sits in a warehouse for a season.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Bustleton Homes
- Freeze-thaw crown cracks. Philadelphia’s winters push water into small cracks in the mortar crown, freeze, expand, and widen them. Over a few seasons, that water soaks the brick below and shows up as a ceiling stain near the chimney breast before anybody thinks to look at the crown.
- Cracked clay flue tiles. The original tiles in a 1950s-60s Bustleton chimney have been heated and cooled for six or seven decades. Without a proper cap, the cracks grow, rain enters, and the damage compounds into blockages and spalling inside the flue.
- Missing or undersized caps. Chimney swifts and squirrels get in through a missing cap and build nests that obstruct the flue. A blocked flue is a fire hazard, full stop, and it’s the most common thing found during a first-ever inspection on a house that passed down in the family.
- Spalled brick and deteriorated mortar at the crown line. The top of the stack takes the most weather. When the crown no longer overhangs the brick face, water runs down the masonry instead of off it, and the brick faces start to pop.
Pricing for Chimney Cap & Crown in Bustleton, PA
The written estimate sets the final price, and the estimate is free. These are typical ranges for the Bustleton market, not a menu.
- Standard single-flue stainless cap installation: $250 – $550
- Multi-flue or custom stainless cap: $550 – $1,400
- Crown coating with a flexible sealant: $400 – $800
- Crown repair or partial rebuild: $650 – $1,600
- Crown rebuild with full removal and new slope: $1,200 – $2,500
- Camera inspection and photo report included with the visit
What moves the number: how many flue openings the stack has, whether the crown is being resealed versus cut out and rebuilt, and whether the inspection turns up cracked tiles that need a liner assessment in the same visit. You’ll see the photos before you see a number. If the work can wait a season without damage, we’ll say so. Call (833) 350-7109 to book the inspection.
We Also Serve Cities Near Bustleton
The local professionals we connect you with also cover Northeast Philadelphia, Rhawnhurst, Somerton, and Lower Moreland. The housing stock is similar on both sides of the city line, which means the same crown and cap failures show up a few miles apart. If you’re the owner of a twin just outside the Bustleton line, the inspection process doesn’t change. Our chimney cap & crown team handles the whole footprint. One call covers the cap, the crown, and the answer to whether the flue needs more.
Serving Bustleton, PA – Our Local Coverage Area
We serve Bustleton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Bustleton
You don’t know until someone runs a camera down the flue. The cap goes on either way, but cracked tiles change what the cap needs to do. A Level 2 inspection with video shows the tile joints, any spalling inside the flue, and whether an appliance is venting into a stack that wasn’t designed for it. Ask to see the footage before the cap is sized. Call (833) 350-7109 and we’ll book the inspection – estimates are free.
Because the repair didn’t address movement, or the crown was patched with a rigid material that can’t flex through a Philadelphia winter. The sloped top of a chimney expands and contracts every freeze-thaw cycle, so a thin rigid patch just re-cracks along the same line. The durable fix is a rebuild with a proper overhang past the brick face, or HeatShield resurfacing where the crown is sound enough to coat. A camera doesn’t tell you this, but the photos of the crown edge do. Call (833) 350-7109 for a free estimate.
Yes, and squirrels are only the second most likely culprit. The classic Bustleton call is a homeowner who has never had the chimney swept, because the house passed down in the family, and the sweep finds a flue clogged with decades of creosote plus a nest of chimney swifts or squirrels that got in through a missing cap. The animal comes out, the obstruction clears, and the cap goes on. Call (833) 350-7109 to get it looked at.
A coating can fix the crown; it can’t fix the brick below it. If the spalling is at the crown line and the crown itself is crumbled through its full depth, coating won’t hold and the crown needs cut out and rebuilt. If the brick faces are popping further down the stack, that’s water that’s been getting in for years, and the assessment has to include the flue too. Camera evidence comes first. Call (833) 350-7109 for a free estimate with photos.
NFPA 211 calls for annual inspection of chimneys, fireplaces, and vents, and the standard doesn’t exempt a chimney just because the fireplace is used lightly. The reason is what else is in the stack. In a Bustleton rowhouse, a furnace or water heater is often venting into the same chimney, and a cracked crown or a loose cap can let water or animals into a flue you never think about. If work can safely wait a season, we’ll tell you. Call (833) 350-7109 to book it.
If your crown is cracking, your cap is missing, or a freeze-thaw winter has opened up the top of the stack, the fix starts with someone getting up there and documenting it. What happens next depends on what the camera shows, not on what a salesperson wants to sell. Our technicians have up to 9 years of experience, and the local professionals we connect you with are licensed and insured as their state requires. Call (833) 350-7109 for a free estimate on chimney cap and crown work in Bustleton. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Bustleton.