Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Jenkintown
If your chimney is showing its age, you’re in the right place. Chimney repair in Jenkintown usually means one of two things: a masonry stack that needs repointing or rebuilding, or a clay-tile flue that’s cracked and needs resurfacing or a new liner. We handle both, and we don’t recommend either until you’ve seen the camera footage yourself. Call (833) 350-7109 and we’ll get a technician out to your block, whether you’re just off Old York Road or up toward the Jenkintown-Wyncote line. Our technicians have up to 9 years of experience, and we know these older borough homes well enough to tell you what’s likely wrong before we even open the damper.
Why Jenkintown Homeowners Call Chimney Sweep Bustleton for Chimney Repair
Jenkintown has a lot of chimneys that were built to last but weren’t built for what’s venting through them today. That’s the reality of a borough full of 1920s to ’40s brick and stucco colonials and Tudors. Most still carry their original clay-tile flues, and plenty have had fireplaces converted to gas logs or wood inserts that vent into stacks never sized or lined for them. When a homeowner calls for a routine sweep, the job often turns into a Level 2 camera inspection before any brush goes in. That’s not upselling. It’s what the flue actually tells us.
We work the full system, not just the sweep. Mortar repointing, spalling brick repair, chimney rebuilding, waterproofing, flashing repair, tuckpointing, liner installation, caps and crowns: one company, one visit, no second contractor to chase down. We specify the material by name because it matters. HeatShield resurfacing restores a still-sound clay-tile flue without tearing it out. A DuraFlex stainless liner gets sized to whatever appliance is venting into the stack now, not what was there in 1935. And when a rebuild is the honest answer, we say so and show you why.
The other thing we hear from Jenkintown homeowners: they’ve been told they need thousands of dollars of liner or masonry work with nothing to back it up. We don’t operate that way. Nothing gets recommended without camera evidence you can watch on the screen while we’re standing there. Sometimes the answer is that the work can safely wait a season. We’ll tell you that too.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Jenkintown
Not every chimney needs the same repair. What we find is usually driven by the age of the stack, how it’s built, and what’s venting through it. Here’s what we handle most in Jenkintown.
Mortar Repointing in Jenkintown
Repointing replaces the failed mortar joints between bricks before the brick itself starts to go. On Jenkintown’s older homes, the joints above the roofline take the worst of it, because that’s where freeze-thaw hits hardest. We grind out the old mortar to the right depth and pack in new material matched to the original, so the repair holds and the stack still looks like it belongs on the house. A typical repointing job on a Jenkintown stack runs $600 to $1,800 depending on height and how many faces need work.

Spalling Brick Repair in Jenkintown
Spalling is brick that’s flaking, crumbling, or popping its face off. Southeastern Pennsylvania’s freeze-thaw winters are hard on moisture-saturated brick, and once water gets in and freezes, the face gives way. We replace the failed units with brick matched to the rest of the stack, not whatever’s closest on the shelf. Left alone, spalling spreads and the stack loses structural integrity. Typical spalling repair in Jenkintown runs $500 to $2,500 depending on how many bricks are affected.

Chimney Waterproofing in Jenkintown
Water is the number one cause of masonry failure on these older stacks, and waterproofing is the cheapest way to slow it down. We apply a breathable water repellent that keeps rain out but lets the masonry dry from the inside. That matters here because humid summers already stress these stacks. It’s not a fix for a failing chimney. It’s protection for one that’s in decent shape, and we’ll tell you honestly which you’re looking at. Waterproofing typically runs $300 to $700 in Jenkintown.

Flashing Repair in Jenkintown
Flashing is the metal where the chimney meets the roof, and when it fails, water runs straight down into the attic and ceiling. On the older homes around Jenkintown, we often find flashing that’s pulled loose, rusted through, or was never installed to code in the first place. We repair or replace it with proper step and counter-flashing. Typical flashing repair runs $400 to $900 depending on roof pitch and how much needs replacing.
Trusted Brands We Service in Jenkintown
We work with professional-grade materials because the difference shows up years later. DuraFlex flexible liners are what we install when a stainless liner is the right call, and HeatShield resurfacing is what we use when the existing clay tile can be saved without a full tear-out. Caps and crowns come from Gelco and Famco, and components from Olympia Chimney and Copperfield. These aren’t generic big-box substitutes; they’re products built for the long haul. If you already have one of these systems on your chimney, we’ll inspect it, service it, and tell you honestly how much life it has left.
Common Chimney Repair Problems We See in Jenkintown Homes
Certain failures come up again and again on Jenkintown’s older blocks. Here’s what to watch for.
- Cracked clay-tile liners from freeze-thaw moisture. These get pushed as “needs a full reline today” by some companies, before any camera footage is shown. We show you the crack first, then explain the options.
- Stacks rebuilt with modern brick but never relined. On the older blocks near the Jenkintown-Wyncote line, technicians routinely find stacks that were rebuilt years ago but never got a new liner, leaving mortar rubble pooled behind the damper. That rubble gets misdiagnosed as simple soot buildup.
- Gas or wood insert retrofits venting into original flues. These flues were sized for open fireplaces, not inserts, and the mismatch causes poor draft and third-degree creosote glaze a brush can’t touch.
- Cracked crowns and failing flashing around the roofline. Exterior stacks on these homes take the brunt of freeze-thaw, so a cracked crown and pulled flashing usually get flagged in the same visit as the flue liner question.
Pricing for Chimney Repair in Jenkintown, PA
We set every price per job from a written estimate, and the estimate is free. What we quote is what you pay. Here are typical ranges for the repairs Jenkintown homeowners call us about most:
| Service | Typical Range in Jenkintown |
|---|---|
| Mortar repointing | $600 – $1,800 |
| Spalling brick repair | $500 – $2,500 |
| Chimney waterproofing | $300 – $700 |
| Flashing repair | $400 – $900 |
| Chimney rebuilding | $3,000 – $8,000 |
What moves the number: how high the stack goes above the roofline, how many faces need work, whether scaffold or staging is needed, and how far the damage has spread. A partial rebuild on a low stack sits at the bottom of the range. A full rebuild above the roofline on a tall exterior stack pushes toward the top. Call (833) 350-7109 for an exact quote. Estimates are free.
See the difference
Before
After
Before
After
Before
AfterWe Also Serve Cities Near Jenkintown
The same older-home chimney problems show up on the surrounding blocks, so we cover Rockledge, Roslyn, Elkins Park, and Glenside. Same camera-first approach, same written estimate, same brands. If you’re just outside the borough, you’re not too far. Call (833) 350-7109 and we’ll confirm coverage. Read more about our full chimney repair services or check out what we do for Jenkintown.
Do I really need camera footage before agreeing to repointing or a rebuild?
Yes. Any honest recommendation to repoint, resurface, or rebuild should come with camera footage of the inside of your flue that you can see before you approve the work. On an older Jenkintown brick or stucco colonial, a homeowner calls for a routine sweep and the technician finds crumbling mortar joints behind the damper and rubble sitting on top of the smoke chamber. Often that’s a sign the stack was rebuilt years ago but never relined. A qualified pro runs a Level 2 camera inspection, shows you the footage on screen, and lays out the options: HeatShield resurfacing for a still-sound clay-tile flue, or a DuraFlex stainless liner sized to whichever appliance is venting into it. Exterior stacks here take the brunt of freeze-thaw, so spalling brick and a cracked crown usually get flagged in the same visit. Nothing gets recommended without that footage. Call (833) 350-7109 for a free estimate.
Serving Jenkintown, PA – Our Local Coverage Area
We serve Jenkintown and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Jenkintown
It can often be saved. A sound clay-tile flue with joint cracking can frequently be restored with HeatShield resurfacing rather than a full reline. The deciding factor is what the camera shows: hairline cracks versus missing tile versus rubble behind the damper. We show you the footage and explain which applies. If resurfacing isn’t enough, a DuraFlex stainless liner sized to the appliance is the next step. Call (833) 350-7109 for a free estimate.
Because the outside face and the joints behind the brick are two different things. Exterior stacks on Jenkintown’s older homes suffer freeze-thaw damage from the inside out, and a stack can look solid while the mortar joints behind the damper are crumbling and rubble is pooled on top of the smoke chamber. That’s a common find on these blocks. Camera inspection shows what the outside glance can’t. Call (833) 350-7109 to book one.
Yes, just as much as a wood-burning flue, sometimes more. The original flue was sized for an open fireplace, not for an insert, and the mismatch leads to poor draft and third-degree creosote glaze a brush can’t remove. Those inserts also put different moisture loads on a clay tile flue never designed for them. We inspect to see how the insert is venting into the stack and what’s accumulated. Call (833) 350-7109 for a free estimate.
Creosote builds up in three forms. First-degree is a light, flaky soot that a standard brush handles. Third-degree is a glazed, hard coating bonded to the flue that a brush cannot touch. Third-degree buildup signals a mismatch between the flue and the appliance, which is exactly what happens in older Jenkintown homes where inserts vent into original clay-tile stacks. That glaze usually means resurfacing or relining is the real fix, not another sweep. Call (833) 350-7109 to have it inspected.
Yes, we cover all of Jenkintown, and typically within a day or two once a sweep is booked. We also serve Rockledge, Roslyn, Elkins Park, and Glenside. The right approach depends on what your flue is doing, so we start with a camera inspection and a written estimate before any work. Call (833) 350-7109. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Book Your Jenkintown Chimney Repair Today
If your chimney is showing spalling brick, cracked mortar, a pulling flashing, or a flue that’s never been looked at properly, don’t wait for the next freeze to make it worse. We serve Jenkintown and the surrounding blocks with the full range of chimney repair, from repointing to full rebuilding, and we don’t recommend anything you can’t see for yourself on the camera screen. Call (833) 350-7109 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Bustleton.