Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Somerton, PA
We provide independent DuraFlex service across Somerton: Level 2 inspections, sweeps, cap replacement, and relining on flexible stainless systems that have been in these houses for years. The one thing that shapes our DuraFlex work here is that so many Somerton chimneys were never lined to begin with, so a “cleaning” often turns into a conversation about the chase around the liner. Our technicians have up to 9 years of experience with flexible liner systems and the masonry that holds them.
We know DuraFlex from the inside: how their flexible stainless liners and insulation blankets are sized, jointed, and terminated, and how those components behave after decades inside a brick exterior chase. We’re an independent shop, not affiliated with or authorized by the manufacturer, so we evaluate your system on its actual condition and tell you plainly whether it needs a repair, a reline, or nothing at all. Book a sweep in Somerton by calling (833) 350-7109. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Somerton Residents Choose Us for DuraFlex Service
Somerton is a post-war suburban pocket of Northeast Philadelphia, and the housing stock tells you most of what you need to know. Most homes here went up in the 1950s and 60s, and many still have the original masonry fireplace and the original clay flue tile. A flexible stainless liner retrofitted into that tile years later is a good system. But the tile around it is what we end up inspecting most closely, because that’s the part that cracks, spalls, and lets water in.
When you call us for DuraFlex work in Somerton, you get a clear picture of the whole chimney system, not just the flue. We look at the liner, the joints, the top plate and termination, the crown, and the masonry chase around all of it. Then we tell you what’s actually wrong and what a repair involves.
We specify DuraFlex OEM components where they’re still available for your specific system, because mixing brands at the joint and termination is where leaks start. When a system is obsolete, we’ll tell you a quality UL-listed equivalent reline is the honest move rather than chasing discontinued parts. The estimate is free, the price is set per job by the written estimate, and scheduling is straightforward.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Solve in Somerton
The same handful of DuraFlex issues come up again and again on Somerton chimneys. Here’s what we look for and why.
- Bare-brick chases on 1950s-60s split-levels. Some Somerton homes were never fitted with a liner at all, so a DuraFlex liner was retrofitted later into a chase that was never built for one. When the surrounding masonry spalls or the mortar joints let go, it’s the brick and not the liner that fails. We inspect the chase as closely as the flue, because the liner is only as good as what holds it.
- Joint and clamp band loosening at flue offsets. Flexible liner joints and clamp bands can work loose where the flue has a bend, letting creosote pack into the gap at the offset. Somerton’s freeze-thaw winters and humid summers push on the termination, and every push works on those joints a little more.
- Insulation wrap degrading or tearing during install. DuraFlex insulated liners depend on their wrap to keep the stainless warm and the condensation down. In tight original clay tiles, that wrap can tear on the way down, exposing cold stainless to heavy condensation. Once the wrap is compromised, the liner stops behaving the way it was engineered to.
- Top plate and cap connection corroding. On the many exposed exterior chimneys in Somerton, freeze-thaw cycles and humid summers drive water into the termination. The top plate and the cap connection are where that water does its damage, and a corroded termination lets moisture run down between the liner and the masonry.
- Creosote glaze from steady fireplace use. Homeowners who burn regularly build up a heavy glaze that a light sweep won’t move. It’s a sign the flue is running cool, often because the liner was sized to the old tile rather than the appliance.
DuraFlex Service in Somerton: What Local Conditions Mean for Your Equipment
On the split-levels off the 19116 streets, the chimney frequently rides an outside wall with no liner at all, just bare brick. That’s the local reality that shapes our DuraFlex work here, and it’s why what you book as a routine annual sweep often becomes a Level 2 camera inspection and a relining conversation once the flue is opened up. A sweep is a cleaning. A camera inspection shows you what you’re actually working with.
Here’s how this kind of job usually goes. A homeowner books a routine fall sweep on a 1960s brick split-level, and once the flue is opened the sweep finds no liner, just original clay tile or bare brick with spalled mortar and a heavy creosote glaze. The usual cause is decades of freeze-thaw on an unlined exterior chase, plus a DuraFlex retrofit that was sized to the tile rather than the appliance. A qualified local pro typically runs a camera, documents the flue and any existing liner joints, then recommends repointing or rebuilding the chase and installing a correctly sized insulated DuraFlex liner with a new top plate and cap before the first hard freeze.
That timing matters in Somerton. Philadelphia’s humid summers and freeze-thaw winters accelerate mortar joint deterioration on exposed exterior chimneys, so a fall inspection before the first hard freeze catches problems while there’s still time to schedule the work calmly. If we find something, we show you the camera footage and the photos. Nothing gets recommended that you can’t see for yourself, and we’ll say plainly when a repair can safely wait until spring.
DuraFlex Models & Products We Service in Somerton
We service the flexible side of DuraFlex on Somerton chimneys: the DuraFlex SW standard wall stainless flexible liner, the DuraFlex Pro flexible relining kit with insulation wrap, the DuraFlex insulated flexible liner, and DuraFlex rigid stainless liner sections used in straight exterior chases. Alongside the liner itself, we handle the components at either end, the top plates and the caps, since those are the parts that fail first on an exposed chimney.
We choose DuraFlex OEM components and caps whenever they’re still available for your specific system. Fit matters more than brand loyalty at the joint. Where a system is obsolete, we’ll spec a quality UL-listed equivalent reline rather than chase discontinued parts. We don’t stock parts on a truck or carry an inventory, so we assess the system first, then specify exactly what the repair needs.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Somerton
Here’s what chimney work typically runs in this area. Your written estimate sets the final price.
| Service | Typical estimated cost |
|---|---|
| Standard chimney sweep | $150-$280 |
| Level 2 camera inspection with photo report | $200-$400 |
| Chimney cap replacement | $200-$450 |
| Crown repair or rebuild | $350-$900 |
| Insulated DuraFlex liner installation | $2,600-$5,500 |
| Chimney rebuild (masonry chase) | $4,000-$12,000 and up |
What drives the cost is the liner length, whether the chase has to be repointed or rebuilt first, and what’s at the termination. The estimate is free and includes what we find on the inspection. Call (833) 350-7109 for your Somerton estimate.
Serving Somerton, PA – Our Local Coverage Area
We serve Somerton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Somerton
Often yes. A flexible stainless liner can go into many original chases without a full rebuild, but it depends on whether the brick and mortar surrounding it are sound enough to hold the liner and keep water out. We run a camera first to see the condition of the chase before we promise anything.
The camera tells us. If the stainless is sound and only the cap, top plate, or wrap needs attention, that’s a repair. Full replacement makes sense only when the stainless itself is perforated or the chase has no serviceable liner at all. We show you the footage so the decision is yours.
Loose joint and clamp bands at a flue offset let creosote pack into the gap at the bend, and a liner sized to the old tile rather than the appliance runs cool enough to glaze. We check the joints and the sizing together.
Usually. On exposed exterior chimneys, freeze-thaw and humid summers work on the top plate and cap connection more than the stainless below, and a corroded termination lets water run down between the liner and the masonry. Our Cap Replacement service focuses there.
No. A Level 1 is a visual check of what’s accessible, and an unlined or retrofitted chase needs a Level 2 camera inspection to see the flue and any liner joints. It’s the only way to know whether the bare brick or original clay tile is actually failing. Call (833) 350-7109 to book one – the estimate is free.
Service Areas Near Somerton
We also serve homeowners in Bustleton, Penndel, Warminster, Village Shires, Elkins Park, and Jenkintown. See our Bustleton page and our Lower Moreland page for the same DuraFlex service in those areas.
Book Your DuraFlex Service in Somerton Today
Get a free estimate on your DuraFlex system in Somerton. We’ll run the inspection, show you what we find, and give you a written price before any work is booked. Call (833) 350-7109. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Bustleton.