Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Jenkintown
If your chimney cap is missing, rusted through, or your crown has cracked and started letting water into the stack, we handle the whole job in Jenkintown: inspection first, then a properly sized cap and a crowned, sealed wash built for this climate. We know the older brick and stucco homes along the narrow borough streets here, and we know that a cap or crown call on a 1930s colonial often turns into something bigger once we get a camera up the flue. That’s why every Jenkintown visit starts with a camera inspection and a photo report you can see before anything is recommended. Call (833) 350-7109. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Jenkintown Homeowners Call Chimney Sweep Bustleton for Chimney Cap & Crown
We’re a full-scope chimney specialist, not a sweep-only crew or a general handyman. That matters in Jenkintown because the cap and crown decisions here are tied to the liner and the masonry below them, and one company should be able to read all of it. We install DuraFlex flexible liner systems, we’re certified to apply HeatShield resurfacing, and we fit purpose-engineered Gelco and Famco caps rather than a generic cover screwed over the flue.
Our technicians have up to 9 years of experience with exactly this kind of housing stock: original clay-tile flues, parged fireboxes, and exterior stacks that have taken decades of freeze-thaw. When we schedule a cap or crown call in Jenkintown, you get a straight answer about what we found, what it costs, and what can safely wait. Nothing gets recommended without camera evidence you can look at yourself, because that’s where the worst upselling in this trade happens. We serve Jenkintown and the surrounding boroughs, and we’d rather tell you your crown has another few years than sell you a rebuild you don’t need.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Jenkintown
Our chimney cap & crown work covers the top of the system, which is where most water damage in Jenkintown homes starts. Here’s how each piece usually goes.
Cap Installation
A correctly sized stainless cap keeps rain, birds, and debris out of the flue while still letting the chimney breathe. In Jenkintown, sizing matters more than people expect, because a flue that was relined at some point rarely matches the cap that came off it. We measure the actual flue, then fit a Gelco or Olympia cap built for that opening.

Cap Replacement
Most Jenkintown caps we replace have rusted from the inside out or blown loose on an exterior stack that takes the full weather. A loose cap is worse than no cap, since it can rattle, let water track down the flue, or drop into the stack. We pull the old one, check the flue and crown while we’re up there, and fit a replacement that’s fastened down properly.

Crown Repair
The crown is the concrete wash at the top of the stack that sheds water away from the brick. On Jenkintown’s 1920s-40s colonials and Tudors, it’s common to find hairline cracks that have widened after years of freezing and thawing. We repair the crown and re-slope it so it drains the way it should, rather than patching over a surface that will crack again next winter.

Crown Coating
Where the crown is sound but porous, a flexible coating seals it without a full rebuild. This is often the right call on Jenkintown stacks that were re-pointed decades ago and are otherwise holding well. We specify the coating for the condition we actually find, and we show you the photos before we recommend it.
Trusted Brands We Service in Jenkintown
We work with professional-grade components, specified by name. DuraFlex for flexible liner systems, HeatShield for resurfacing and liner repair, and Gelco, Olympia Chimney, and Famco for caps and related components. These aren’t big-box substitutes, and we don’t claim to stock them locally either. What that means for a Jenkintown homeowner is a part matched to your flue and ordered for your job, so the turnaround is set by what your chimney actually needs. If a standard cap fits your stack, we’ll say so. If your setup calls for a custom cap, we’ll explain why before anything is ordered.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Jenkintown Homes
The housing stock here drives the failure modes. These are the ones we run into most in Jenkintown.
- Cracked and spalling clay-tile liners. Original clay tiles fracture from repeated freeze-thaw, which lets moisture reach the surrounding mortar and rust the damper. It gets worse when a modern appliance is vented into a stack that was never designed for it.
- Hidden mortar rubble behind the damper. On blocks near the Jenkintown-Wyncote line, stacks were sometimes rebuilt with modern brick but never given a new liner. A brush sweep can’t clear the rubble that collects behind the damper; only a camera inspection reveals it.
- Degraded parged fireboxes and smoke chambers. Summer humidity and creosote buildup break down the parging in these older homes, which leads to draft problems and first-degree creosote that can progress to third-degree glaze if it’s ignored.
- Cracked crowns on exterior stacks. The stacks that face the weather take the brunt of it. Once the crown cracks, water soaks into the brick and mortar, and the next freeze pushes the joints apart.
Pricing for Chimney Cap & Crown in Jenkintown, PA
Here’s what this kind of work typically runs in the Jenkintown market. A standard cap installation usually lands around $250 to $600, depending on flue size and the cap you choose. A custom or multi-flue cap for a Tudor with two chimneys typically runs $600 to $1,200. Crown repair generally falls between $400 and $1,100, and a crown coating runs about $350 to $750. If a camera inspection turns up a cracked liner, a HeatShield repair is a separate line item we quote after you’ve seen the video. The written estimate sets the final price, and the estimate itself is free. Call (833) 350-7109 for an exact quote.
We Also Serve Cities Near Jenkintown
We take cap and crown calls in the towns around Jenkintown as well, including Rockledge, Roslyn, Elkins Park, and Glenside. The housing stock in these boroughs is close cousin to Jenkintown’s, so the inspection-first approach is the same. If your chimney sits in one of these towns, call and we’ll book it the same way.
Serving Jenkintown, PA – Our Local Coverage Area
We serve Jenkintown and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Jenkintown
Because a cap or crown call on an older Jenkintown home can hide a liner problem you can’t see from the roof, and we won’t recommend work you have no way to verify. On the older blocks near the Jenkintown-Wyncote line, a routine cap call routinely turns into a camera inspection and reline quote once mortar rubble shows up behind the damper. The camera gives you the same view we have, so the decision is yours. Call (833) 350-7109 for an exact quote; estimates are free.
Yes, you can get a cap, but the missing liner should be addressed first because a cap over an unlined stack just keeps the water out while the flue continues to degrade. A rebuilt brick stack with no liner is one of the most common situations we find in Jenkintown’s older colonials. We’ll run the camera, show you the condition of the flue, and lay out the options with prices. Call (833) 350-7109 to schedule the inspection; estimates are free.
Repeated freezing of moisture-saturated brick and mortar is what cracks crowns and splits joints, and it’s the main reason chimney tops fail here. When water gets into a porous crown or an open flue, it freezes, expands, and pushes the masonry apart. A sound, properly sloped crown and a fitted cap are what break that cycle. Call (833) 350-7109 to have yours checked; estimates are free.
First-degree creosote is a light, flaky deposit that a sweep can usually clear; third-degree is a hardened, glazed layer that a brush won’t touch and that raises chimney fire risk. In Jenkintown’s older homes, summer humidity and creosote buildup break down parged fireboxes and smoke chambers, and first-degree deposits can progress to glaze if they’re ignored. A camera inspection tells you which you have. Call (833) 350-7109 to book one; estimates are free.
A multi-flue cap is often the right choice when two flues share one stack, which is common in Jenkintown’s Tudors. It covers both openings with one fitted unit, seated on the crown, and reduces the number of places water can get in. We’ll measure both flues before recommending one. Call (833) 350-7109 for an exact quote; estimates are free.
If your cap is gone or your crown is cracking, the sooner it’s addressed the less masonry it takes with it. We’ll inspect first, show you the camera report, and quote the work in writing. Call (833) 350-7109 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Bustleton.