Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Rhawnhurst
If your chimney crown is crumbling or your cap blew loose, we handle the repair for Rhawnhurst homeowners. In this neighborhood of brick rowhouses and twins, the cap and crown are usually the first parts of a chimney to fail, and they’re the cheapest to fix before water gets deeper. We know these blocks, the alley-fed lots off Castor Avenue and Rhawn Street, and the tarred flat rooflines that make roof access its own job. Call (833) 350-7109 to set up a free estimate. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday.
Why Rhawnhurst Homeowners Call Chimney Sweep Bustleton for Chimney Cap & Crown
Rhawnhurst is full of mid-century brick chimneys that need someone who actually understands them. Almost every chimney here shares a stack between an old boiler flue and a fireplace flue, and that arrangement trips up general handymen who cap one opening and choke the draft on the other. Our technicians have up to 9 years of experience reading these shared stacks and know to check both flues before touching anything.
We handle the full system, not just the sweep: cap and crown work, liners, rebuilds, and fireplace repair under one company, so you’re not hunting for a second contractor when the inspection turns up more than the cap.
We work with professional-grade products specified by name, including Gelco and Olympia Chimney caps and HeatShield resurfacing, so the repair is built for long-term performance rather than a generic cover off a shelf. We keep a strong local reputation across Rhawnhurst, and homeowners here who’ve had a cap installed or a crown rebuilt come back to us for the sweep and the liner check. Roof access on these tight lots and drop-cloth containment are the real craft locally, and we plan for both before we arrive.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Rhawnhurst
We cover the whole cap-and-crown job in Rhawnhurst, from a single replacement cap to a custom multi-flue build. Here’s what each service involves on these homes.
Cap Installation in Rhawnhurst
A correct cap keeps rain, birds, and debris out of the flue while letting exhaust escape freely. On Rhawnhurst rowhouses, sizing matters because a cap that’s too restrictive on a shared stack can worsen draft. We measure the flue and match the cap to it, including purpose-engineered Gelco caps built for the job.

Cap Replacement in Rhawnhurst
Older caps rust out, loosen in wind, or were never sized right to begin with. Replacing one restores the protection and is often the fastest fix on the whole chimney. We check the crown and flashing while we’re up there so a new cap isn’t sitting on a surface that’s already failing. Our chimney cap & crown team handles cap replacement across Rhawnhurst.

Crown Repair in Rhawnhurst
The crown is the concrete or mortar cap over the top of the chimney, and Northeast Philadelphia’s freeze-thaw winters crack and spall it. Once it cracks, water runs behind the flashing and starts rusting the damper and eating mortar joints below. Crown repair rebuilds that protective surface so water sheds the way it should.

Crown Coating in Rhawnhurst
When the crown is cracked but still structurally sound, a coating can restore it without a full rebuild. We’re certified to apply HeatShield chimney resurfacing, which repairs integrity rather than replacing the whole crown. It’s a good fit for Rhawnhurst chimneys where the surface is failing but the structure is intact.
Trusted Brands We Service in Rhawnhurst
We work with professional-grade materials, and we name them so you know what’s going on your chimney. Our caps come from Gelco and Olympia Chimney, our resurfacing uses HeatShield, and our liner work uses DuraFlex. These are purpose-engineered products for chimney systems, not generic covers that fail after a couple of winters. We don’t claim to stock everything locally; we source the right component for the repair and let you know what it is and why it fits. The right material for the job, specified by name, is how we keep these Rhawnhurst chimneys working.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Rhawnhurst Homes
- Crown spalling from freeze-thaw. Exposed brick crowns in Rhawnhurst crack and flake as water freezes and thaws through the seasons. That lets water run behind the flashing, rusts the damper, and softens mortar joints lower down.
- Cracked terracotta flue liners. The original clay tiles in these 1940s to 1960s homes are often brittle and undersized for today’s gas and oil appliances. A camera inspection shows the cracks before anyone recommends a fix.
- Multi-flue draft interference. Many Rhawnhurst chimneys have the boiler flue and fireplace flue side by side in one stack. A cap installed for one opening can block the other’s draft, causing smoke spillage and creosote buildup.
- Abandoned fireplace flues. Homeowners here often discover the fireplace side is capped or abandoned while the boiler side stays active. Both must be checked before sweeping so a closed flue doesn’t go unnoticed.
Pricing for Chimney Cap & Crown in Rhawnhurst, PA
Prices vary with the size of the stack and how much of it has failed, but a few typical ranges hold across Rhawnhurst. A standard cap installation usually runs $250 to $550, a custom or multi-flue cap for a shared stack runs $400 to $900, and crown repair or coating typically lands between $350 and $1,200 depending on whether it’s a resurfacing or a rebuild. These are estimates; the written estimate sets the final price. Nothing gets recommended without camera evidence you can see for yourself, and we’ll say plainly when a repair can safely wait. The estimate is free.
We Also Serve Cities Near Rhawnhurst
We serve homeowners across Rhawnhurst and the surrounding areas, and we also take chimney cap and crown work in Northeast Philadelphia, Bustleton, Torresdale, and Jenkintown. Same shared-stack conditions, same freeze-thaw winters on the crowns, and the same camera-verified approach to every inspection. If you’re just outside Rhawnhurst, call and we’ll confirm coverage.
Serving Rhawnhurst, PA – Our Local Coverage Area
We serve Rhawnhurst and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Rhawnhurst
It’s usually because the original coal furnace was later converted to gas or oil and the fireplace flue sits beside it in one shared stack. That means you need a custom or multi-flue cap sized so neither opening loses draft. This is a balancing act most single-flue suburban chimneys never see, and it’s why we check both flues before recommending anything. Call (833) 350-7109 for an exact quote; estimates are free.
Look for visible cracks, flaking concrete, or dark water staining below the crown on the brick. In these winters the surface spalls as water freezes inside it, and a failing crown lets water behind the flashing. We confirm it with a camera and show you what we see before any repair.
Yes. A custom multi-flue cap is made to cover both openings in the stack while keeping each flue’s draft working. We measure the whole stack, not just one opening, so the boiler vent stays clear and the abandoned fireplace flue stays protected. Call (833) 350-7109 for an exact quote.
A cap keeps rain and moisture out of the flue, and humid summers here soften creosote in fireplaces that rarely burn. That moisture accelerates deterioration in an already brittle terracotta liner. A correctly fitted cap slows it down, and we check the flue while we’re installing it.
Crown repair rebuilds or replaces a crown that’s structurally failing, while crown coating resurfaces one that’s cracked but still sound. Coating is often the lower-cost fix when the structure holds up. We use HeatShield resurfacing certified application and let the camera evidence decide which one you actually need.
If your cap is loose or the crown is cracking, don’t wait for the next freeze. Call (833) 350-7109 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll show you exactly what’s wrong, name the material that fixes it, and tell you what can wait.
Written by the team at Chimney Sweep Bustleton.